漏洞修补列表

OpenSSL

1.1.1n

HWPSIRT-2022-52393

CVE-2022-2068

9.8

In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.4 (Affected 3.0.0,3.0.1,3.0.2,3.0.3). Fixed in OpenSSL 1.1.1p (Affected 1.1.1-1.1.1o). Fixed in OpenSSL 1.0.2zf (Affected 1.0.2-1.0.2ze).

Kunpeng BoostKit 22.0.0

OpenSSL

1.1.1n

HWPSIRT-2022-98220

CVE-2022-1292

9.8

The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd).

Kunpeng BoostKit 22.0.0

OpenSSL

1.1.1n

HWPSIRT-2022-42002

CVE-2022-2097

5.3

AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn't written. In the special case of "in place" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected. Fixed in OpenSSL 3.0.5 (Affected 3.0.0-3.0.4). Fixed in OpenSSL 1.1.1q (Affected 1.1.1-1.1.1p).

Kunpeng BoostKit 22.0.0

zlib

v1.2.12

HWPSIRT-2022-63378

CVE-2022-37434

9.8

zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader (e.g., see the nodejs/node reference).

Kunpeng BoostKit 22.0.0

OpenSSL

1.1.1n

HWPSIRT-2023-62461

CVE-2023-0215

7.5

A use-after-free vulnerability was found in OpenSSL's BIO_new_NDEF function. The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally by OpenSSL to support the SMIME, CMS, and PKCS7 streaming capabilities, but it may also be called directly by end-user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions. For example, if a CMS recipient public key is invalid, the new filter BIO is freed, and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up, and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then calls BIO_pop() on the BIO, a use-after-free will occur, possibly resulting in a crash.

Kunpeng BoostKit 22.0.0.SPC5

OpenSSL

1.1.1n

HWPSIRT-2023-46765

CVE-2023-0286

7.4

Vulnerability Summary for CVE-2023-0286

Kunpeng BoostKit 22.0.0.SPC5

OpenSSL

1.1.1n

HWPSIRT-2023-92182

CVE-2022-4450

7.5

A double-free vulnerability was found in OpenSSL's PEM_read_bio_ex function. The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the "name" (for example, "CERTIFICATE"), any header data, and the payload data. If the function succeeds, then the "name_out," "header," and "data" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. Constructing a PEM file that results in 0 bytes of payload data is possible. In this case, PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a freed buffer. A double-free will occur if the caller also frees this buffer. This will most likely lead to a crash. This could be exploited by an attacker who can supply malicious PEM files for parsing to achieve a denial of service attack.

Kunpeng BoostKit 22.0.0.SPC5

OpenSSL

1.1.1n

HWPSIRT-2023-10355

CVE-2023-0464

7.5

A security vulnerability has been identified in all supported versions

Kunpeng BoostKit 22.0.0.SPC5

OpenSSL

1.1.1n

HWPSIRT-2023-59373

CVE-2023-0465

5.3

Applications that use a non-default option when verifying certificates may be vulnerable to an attack from a malicious CA to circumvent certain checks. Invalid certificate policies in leaf certificates are silently ignored by OpenSSL and other certificate policy checks are skipped for that certificate. A malicious CA could use this to deliberately assert invalid certificate policies in order to circumvent policy checking on the certificate altogether. Policy processing is disabled by default but can be enabled by passing the `-policy' argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()' function.

Kunpeng BoostKit 22.0.0.SPC5

OpenSSL

1.1.1n

HWPSIRT-2023-01784

CVE-2023-0466

5.3

The function X509_VERIFY_PARAM_add0_policy() is documented to implicitly enable the certificate policy check when doing certificate verification. However the implementation of the function does not enable the check which allows certificates with invalid or incorrect policies to pass the certificate verification. As suddenly enabling the policy check could break existing deployments it was decided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy() function. Instead the applications that require OpenSSL to perform certificate policy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly enable the policy check by calling X509_VERIFY_PARAM_set_flags() with the X509_V_FLAG_POLICY_CHECK flag argument. Certificate policy checks are disabled by default in OpenSSL and are not commonly used by applications.

Kunpeng BoostKit 22.0.0.SPC5

OpenSSL

1.1.1n

HWPSIRT-2023-25691

CVE-2022-4304

5.9

A timing-based side channel exists in the OpenSSL RSA Decryption implementation, which could be sufficient to recover a ciphertext across a network in a Bleichenbacher style attack. To achieve a successful decryption, an attacker would have to be able to send a very large number of trial messages for decryption. This issue affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP, and RSASVE.

Kunpeng BoostKit 22.0.0.SPC5

OpenSSL

1.1.1n

HWPSIRT-2023-33676

CVE-2023-2650

6.5

Issue summary: Processing some specially crafted ASN.1 object identifiers or

data containing them may be very slow.

Impact summary: Applications that use OBJ_obj2txt() directly, or use any of

the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message

size limit may experience notable to very long delays when processing those

messages, which may lead to a Denial of Service.

An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers -

most of which have no size limit. OBJ_obj2txt() may be used to translate

an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL

type ASN1_OBJECT) to its canonical numeric text form, which are the

sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by

periods.

When one of the sub-identifiers in the OBJECT IDENTIFIER is very large

(these are sizes that are seen as absurdly large, taking up tens or hundreds

of KiBs), the translation to a decimal number in text may take a very long

time. The time complexity is O(n^2) with 'n' being the size of the

sub-identifiers in bytes (*).

With OpenSSL 3.0, support to fetch cryptographic algorithms using names /

identifiers in string form was introduced. This includes using OBJECT

IDENTIFIERs in canonical numeric text form as identifiers for fetching

algorithms.

Such OBJECT IDENTIFIERs may be received through the ASN.1 structure

AlgorithmIdentifier, which is commonly used in multiple protocols to specify

what cryptographic algorithm should be used to sign or verify, encrypt or

decrypt, or digest passed data.

Applications that call OBJ_obj2txt() directly with untrusted data are

affected, with any version of OpenSSL. If the use is for the mere purpose

of display, the severity is considered low.

In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME,

CMS, CMP/CRMF or TS. It also impacts anything that processes X.509

certificates, including simple things like verifying its signature.

The impact on TLS is relatively low, because all versions of OpenSSL have a

100KiB limit on the peer's certificate chain. Additionally, this only

impacts clients, or servers that have explicitly enabled client

authentication.

In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects,

such as X.509 certificates. This is assumed to not happen in such a way

that it would cause a Denial of Service, so these versions are considered

not affected by this issue in such a way that it would be cause for concern,

and the severity is therefore considered low.

Kunpeng BoostKit 22.0.0.SPC6