--- title: 设置环境变量（modules方式） description: "modules方式支持选择加载环境变量管理模块，本文介绍使用modules方式加载环境变量管理模块的方法。" url: https://www.hikunpeng.com/document/detail/zh/hpchistory/hpckit/install240RC2/KunpengHPCKit_install_014.html sourcePath: /source/zh/hpchistory/hpckit/install240RC2/KunpengHPCKit_install_014.html indexId: fac181c8101b303f67edbbe0e4dd1ed86a48c4d2d6e2386debfbdf6185937c4673 --- # 设置环境变量（modules方式） modules方式支持选择加载环境变量管理模块，本文介绍使用modules方式加载环境变量管理模块的方法。 #### 前提条件 - 已配置yum源。执行以下命令检查节点YUM源是否已配置，确保回显中有OS对应的YUM源。 yum list | grep kernel - 已安装tcl工具。 执行以下命令检查是否已安装tcl工具。 ``` yum list installed | grep tcl.aarch64 ``` 回显有如下信息说明已安装tcl工具。 ``` tcl.aarch64 1:8.6.12-4.oe2203sp1 @anaconda ``` 如果未安装tcl工具，执行以下命令安装。 ``` yum install -y tcl* ``` - 已安装module工具。 执行以下命令检查是否已安装module工具。 ``` yum list installed | grep environment-modules.aarch64 ``` 回显有如下信息说明已安装module工具。 ``` environment-modules.aarch64 5.0.1-3.oe2203sp1 @OS ``` 如果未安装module工具，执行以下命令安装，并加载环境变量。 ``` yum install -y environment-modules source /etc/profile.d/modules.sh ``` #### 注意事项 建议同一环境中使用一种编译器进行编译，如果同时使用两种编译器进行编译，则需要注意环境变量信息是否正确。具体原因及配置方法如下： 由于环境变量信息中，参数“CC”、“CXX”、“FC”、“F77”、“F90”和“OPAL_PREFIX”的值只针对当前使用的编译器生效，如果要使用另一种编译器，需要先卸载当前已有环境变量模块，然后加载需要另一种编译器进行编译的组件环境变量模块。不同编译器编译对应组件的环境变量管理模块时，其环境变量参数值请参见表1。 示例： 当前使用毕昇编译器，已加载环境变量模块“bisheng/hmpi/hmpi”，此时，“OPAL_PREFIX”的值为“/opt/HPCKit/24.6.30/hmpi/bisheng/hmpi”，如果需要切换为GCC编译器，则需要先卸载环境变量模块“bisheng/hmpi/hmpi”，然后加载环境变量模块“gcc/hmpi/hmpi”，加载完成后，“OPAL_PREFIX”的值为“/opt/HPCKit/24.6.30/hmpi/gcc/hmpi”。 #### 操作步骤 1. 使用PuTTY工具，登录HPCKit的安装节点。 2. 执行以下命令，进入HPCKit安装目录。 ``` cd /opt /HPCKit/latest ``` /opt：HPCKit的默认安装目录，请替换为实际路径。 3. 执行以下命令，添加modulefiles。 ``` module use modulefiles ``` 使用sh modulefiles-setup.sh可以恢复误删的modulefiles文件夹。 4. 执行以下命令，查询可用环境变量模块。 ``` module avail ``` 回显如下类似信息： ``` ------------------------------------------------ /opt/HPCKit/24.6.30/modulefiles ------------------------------------------------ bisheng/compiler/bishengmodule bisheng/kml/kml gcc/compiler/gccmodule gcc/kml/kml hio/hio bisheng/hmpi/hmpi bisheng/kml/kspblas/omp gcc/hmpi/hmpi gcc/kml/kspblas/omp bisheng/kml/kblas/omp bisheng/kml/kspblas/serial gcc/kml/kblas/omp gcc/kml/kspblas/serial bisheng/kml/kblas/pthread bisheng/kml/kvml/omp gcc/kml/kblas/pthread gcc/kml/kvml/omp bisheng/kml/kblas/serial-locking bisheng/kml/kvml/serial gcc/kml/kblas/serial-locking gcc/kml/kvml/serial bisheng/kml/kblas/serial-nolocking bisheng/kpccl/kpccl gcc/kml/kblas/serial-nolocking gcc/kpccl/kpccl ``` 如果回显信息中包含不需要加载的模块信息，您可以执行以下命令删除。 module unuse /opt/HPCKit/24.6.30/modulefiles 其中，”/opt/HPCKit/24.6.30/modulefiles”为模块名称，请根据实际情况替换。 5. 加载环境变量模块。 a. 执行以下命令，将组件的相关信息添加至环境变量中。 ``` module load modulefile ``` modulefile：组件环境变量管理模块，具体请参见组件环境变量管理模块信息。 示例：将HMPI组件bisheng版本信息添加到环境变量中 ``` module load bisheng/hmpi/hmpi ``` 当存在环境变量模块不再使用时，您可以执行以下命令卸载。 module unload bisheng/hmpi/hmpi 其中，”bisheng/hmpi/hmpi”为待删除的环境变量模块，请根据实际情况替换。 b. 执行以下命令，查看已加载环境变量模块。 ``` module list ``` 在回显信息中查看所需环境变量模块是否均存在。 - 是，请执行 步骤6 。 - 否，请先执行 5.a 加载缺失环境变量模块，然后执行 6 。 6. 查询对应组件的环境变量信息。 **表1 组件环境变量信息的查询方法** | 组件名称 | 模块名称 | 操作步骤 | | | | --- | --- | --- | --- | --- | | Compiler | bisheng/compiler/bishengmodule | echo $LD\_LIBRARY\_PATH; echo $PATH; echo $CC; echo $CXX; echo $FC; echo $F77; echo $F90 说明： 环境变量参数含义具体如下： LD\_LIBRARY\_PATH：动态链接库的搜索路径，例如“/opt/HPCKit/24.6.30/compiler/bisheng/lib”。 PATH：可执行程序的搜索路径，例如“/opt/HPCKit/24.6.30/compiler/bisheng/bin”。 CC：编译C语言程序的编译器名称，值为clang。 CXX：编译C++程序的编译器名称，值为clang++。 FC：编译Fortran程序的编译器名称，值为flang。 F77：编译Fortran77程序的编译器名称，值为flang。 F90：编译Fortran90程序的编译器名称，值为flang。 回显信息示例： 1 2 3 4 5 6 7 /opt/HPCKit/24.6.30/compiler/bisheng/lib:/usr/local/lib /opt/HPCKit/24.6.30/compiler/bisheng/bin:/usr/local/shc/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin clang clang++ flang flang flang | 1 2 3 4 5 6 7 | /opt/HPCKit/24.6.30/compiler/bisheng/lib:/usr/local/lib /opt/HPCKit/24.6.30/compiler/bisheng/bin:/usr/local/shc/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin clang clang++ flang flang flang | | Compiler | 1 2 3 4 5 6 7 | /opt/HPCKit/24.6.30/compiler/bisheng/lib:/usr/local/lib /opt/HPCKit/24.6.30/compiler/bisheng/bin:/usr/local/shc/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin clang clang++ flang flang flang | | | | gcc/compiler/gccmodule | echo $LD\_LIBRARY\_PATH; echo $PATH; echo $CC; echo $CXX; echo $FC; echo $F77; echo $F90 说明： 环境变量参数含义具体如下： LD\_LIBRARY\_PATH：动态链接库的搜索路径，例如“/opt/HPCKit/24.6.30/compiler/gcc/lib64:/opt/HPCKit/24.6.30/compiler/gcc/lib”。 PATH：可执行程序的搜索路径，例如“/opt/HPCKit/24.6.30/compiler/gcc/bin”。 CC：编译C语言程序的编译器名称，值为gcc。 CXX：编译C++程序的编译器名称，值为g++。 FC：编译Fortran程序的编译器名称，值为gfortran。 F77：编译Fortran77程序的编译器名称，值为gfortran。 F90：编译Fortran90程序的编译器名称，值为gfortran。 回显信息示例： /opt/HPCKit/24.6.30/compiler/gcc/lib64:/usr/local/lib /opt/HPCKit/24.6.30/compiler/gcc/bin:/usr/local/shc/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin gcc g++ gfortran gfortran gfortran | | | | | HMPI | bisheng/hmpi/hmpi | echo $LD\_LIBRARY\_PATH; echo $PATH; echo $INCLUDE; echo $OPAL\_PREFIX 说明： 环境变量参数含义具体如下： LD\_LIBRARY\_PATH：动态链接库的搜索路径，例如“/opt/HPCKit/24.6.30/hmpi/bisheng/hmpi/lib:/opt/HPCKit/24.6.30/hmpi/bisheng/hucx/lib:/opt/HPCKit/24.6.30/hmpi/bisheng/xucg/lib”。 PATH：可执行程序的搜索路径，例如“/opt/HPCKit/24.6.30/hmpi/bisheng/hmpi/bin:/opt/HPCKit/24.6.30/hmpi/bisheng/hucx/bin:/opt/HPCKit/24.6.30/hmpi/bisheng/xucg/bin”。 INCLUDE：Hyper MPI中hmpi、hucx和xucg组件的头文件目录，例如“/opt/HPCKit/24.6.30/hmpi/bisheng/hmpi/include:/opt/HPCKit/24.6.30/hmpi/bisheng/hucx/include:/opt/HPCKit/24.6.30/hmpi/bisheng/xucg/include”。 OPAL\_PREFIX：Hyper MPI中hmpi组件的安装目录，例如“/opt/HPCKit/24.6.30/hmpi/bisheng/hmpi”。 回显信息示例： 1 2 3 4 /opt/HPCKit/24.6.30/hmpi/bisheng/hmpi/lib:/opt/HPCKit/24.6.30/hmpi/bisheng/hucx/lib:/opt/HPCKit/24.6.30/hmpi/bisheng/xucg/lib:/usr/local/lib /opt/HPCKit/24.6.30/hmpi/bisheng/hmpi/bin:/opt/HPCKit/24.6.30/hmpi/bisheng/hucx/bin:/opt/HPCKit/24.6.30/hmpi/bisheng/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/24.6.30/hmpi/bisheng/hmpi/include:/opt/HPCKit/24.6.30/hmpi/bisheng/hucx/include:/opt/HPCKit/24.6.30/hmpi/bisheng/xucg/include /opt/HPCKit/24.6.30/hmpi/bisheng/hmpi | 1 2 3 4 | /opt/HPCKit/24.6.30/hmpi/bisheng/hmpi/lib:/opt/HPCKit/24.6.30/hmpi/bisheng/hucx/lib:/opt/HPCKit/24.6.30/hmpi/bisheng/xucg/lib:/usr/local/lib /opt/HPCKit/24.6.30/hmpi/bisheng/hmpi/bin:/opt/HPCKit/24.6.30/hmpi/bisheng/hucx/bin:/opt/HPCKit/24.6.30/hmpi/bisheng/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/24.6.30/hmpi/bisheng/hmpi/include:/opt/HPCKit/24.6.30/hmpi/bisheng/hucx/include:/opt/HPCKit/24.6.30/hmpi/bisheng/xucg/include /opt/HPCKit/24.6.30/hmpi/bisheng/hmpi | | HMPI | 1 2 3 4 | /opt/HPCKit/24.6.30/hmpi/bisheng/hmpi/lib:/opt/HPCKit/24.6.30/hmpi/bisheng/hucx/lib:/opt/HPCKit/24.6.30/hmpi/bisheng/xucg/lib:/usr/local/lib /opt/HPCKit/24.6.30/hmpi/bisheng/hmpi/bin:/opt/HPCKit/24.6.30/hmpi/bisheng/hucx/bin:/opt/HPCKit/24.6.30/hmpi/bisheng/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/24.6.30/hmpi/bisheng/hmpi/include:/opt/HPCKit/24.6.30/hmpi/bisheng/hucx/include:/opt/HPCKit/24.6.30/hmpi/bisheng/xucg/include /opt/HPCKit/24.6.30/hmpi/bisheng/hmpi | | | | gcc/hmpi/hmpi | echo $LD\_LIBRARY\_PATH; echo $PATH; echo $INCLUDE; echo $OPAL\_PREFIX 说明： 环境变量参数含义具体如下： LD\_LIBRARY\_PATH：动态链接库的搜索路径，例如“/opt/HPCKit/24.6.30/hmpi/gcc/hmpi/lib:/opt/HPCKit/24.6.30/hmpi/gcc/hucx/lib:/opt/HPCKit/24.6.30/hmpi/gcc/xucg/lib”。 PATH：可执行程序的搜索路径，例如“/opt/HPCKit/24.6.30/hmpi/gcc/hmpi/bin:/opt/HPCKit/24.6.30/hmpi/gcc/hucx/bin:/opt/HPCKit/24.6.30/hmpi/gcc/xucg/bin”。 INCLUDE：Hyper MPI中hmpi、hucx和xucg组件的头文件目录，例如“/opt/HPCKit/24.6.30/hmpi/gcc/hmpi/include:/opt/HPCKit/24.6.30/hmpi/gcc/hucx/include:/opt/HPCKit/24.6.30/hmpi/gcc/xucg/include”。 OPAL\_PREFIX：Hyper MPI中hmpi组件的安装目录，例如“/opt/HPCKit/24.6.30/hmpi/gcc/hmpi”。 回显信息示例： /opt/HPCKit/24.6.30/hmpi/gcc/hmpi/lib:/opt/HPCKit/24.6.30/hmpi/gcc/hucx/lib:/opt/HPCKit/24.6.30/hmpi/gcc/xucg/lib:/usr/local/lib /opt/HPCKit/24.6.30/hmpi/gcc/hmpi/bin:/opt/HPCKit/24.6.30/hmpi/gcc/hucx/bin:/opt/HPCKit/24.6.30/hmpi/gcc/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/24.6.30/hmpi/gcc/hmpi/include:/opt/HPCKit/24.6.30/hmpi/gcc/hucx/include:/opt/HPCKit/24.6.30/hmpi/gcc/xucg/include /opt/HPCKit/24.6.30/hmpi/gcc/hmpi | | | | | KML | bisheng/kml/kml | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/bisheng/lib /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | KML | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | | | KML | bisheng/kml/kblas/serial\-locking | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/bisheng/lib/kblas/locking /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kblas/locking /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | KML | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kblas/locking /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | | | KML | bisheng/kml/kblas/serial\-nolocking | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/bisheng/lib/kblas/nolocking /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kblas/nolocking /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | KML | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kblas/nolocking /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | | | KML | bisheng/kml/kblas/omp | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/bisheng/lib/kblas/omp /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kblas/omp /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | KML | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kblas/omp /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | | | KML | bisheng/kml/kblas/pthread | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/bisheng/lib/kblas/pthread /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kblas/pthread /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | KML | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kblas/pthread /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | | | KML | bisheng/kml/kspblas/omp | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/bisheng/lib/kspblas/multi /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kspblas/multi /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | KML | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kspblas/multi /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | | | KML | bisheng/kml/kspblas/serial | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/bisheng/lib/kspblas/single /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kspblas/single /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | KML | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kspblas/single /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | | | KML | bisheng/kml/kvml/omp | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/bisheng/lib/kvml/multi /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kvml/multi /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | KML | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kvml/multi /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | | | KML | bisheng/kml/kvml/serial | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/bisheng/lib/kvml/single /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kvml/single /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | KML | 1 2 3 | /opt/HPCKit/24.6.30/kml/bisheng/lib/kvml/single /opt/HPCKit/24.6.30/kml/bisheng/include /opt/HPCKit/24.6.30/kml/bisheng/include | | | | gcc/kml/kml | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/gcc/lib /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | | | gcc/kml/kblas/serial\-locking | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/gcc/lib/kblas/locking /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kblas/locking /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kblas/locking /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | | | gcc/kml/kblas/serial\-nolocking | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/gcc/lib/kblas/nolocking /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kblas/nolocking /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kblas/nolocking /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | | | gcc/kml/kblas/omp | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/gcc/lib/kblas/omp /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kblas/omp /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kblas/omp /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | | | gcc/kml/kblas/pthread | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/gcc/lib/kblas/pthread /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kblas/pthread /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kblas/pthread /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | | | gcc/kml/kspblas/omp | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/gcc/lib/kspblas/multi /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kspblas/multi /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kspblas/multi /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | | | gcc/kml/kspblas/serial | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/gcc/lib/kspblas/single /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kspblas/single /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kspblas/single /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | | | gcc/kml/kvml/omp | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/gcc/lib/kvml/multi /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kvml/multi /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kvml/multi /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | | | gcc/kml/kvml/serial | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kml/gcc/lib/kvml/single /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kvml/single /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | 1 2 3 | /opt/HPCKit/24.6.30/kml/gcc/lib/kvml/single /opt/HPCKit/24.6.30/kml/gcc/include /opt/HPCKit/24.6.30/kml/gcc/include | | | | | KPCCL | bisheng/kpccl/kpccl | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kpccl/bisheng/lib /opt/HPCKit/24.6.30/kpccl/bisheng/include /opt/HPCKit/24.6.30/kpccl/bisheng/include | 1 2 3 | /opt/HPCKit/24.6.30/kpccl/bisheng/lib /opt/HPCKit/24.6.30/kpccl/bisheng/include /opt/HPCKit/24.6.30/kpccl/bisheng/include | | KPCCL | 1 2 3 | /opt/HPCKit/24.6.30/kpccl/bisheng/lib /opt/HPCKit/24.6.30/kpccl/bisheng/include /opt/HPCKit/24.6.30/kpccl/bisheng/include | | | | gcc/kpccl/kpccl | echo $LD\_LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 /opt/HPCKit/24.6.30/kpccl/gcc/lib /opt/HPCKit/24.6.30/kpccl/gcc/include /opt/HPCKit/24.6.30/kpccl/gcc/include | 1 2 3 | /opt/HPCKit/24.6.30/kpccl/gcc/lib /opt/HPCKit/24.6.30/kpccl/gcc/include /opt/HPCKit/24.6.30/kpccl/gcc/include | | | 1 2 3 | /opt/HPCKit/24.6.30/kpccl/gcc/lib /opt/HPCKit/24.6.30/kpccl/gcc/include /opt/HPCKit/24.6.30/kpccl/gcc/include | | | | | HIO | hio/hio | echo $HIO\_HOME 回显信息示例： 1 /opt/HPCKit/24.6.30/hio | 1 | /opt/HPCKit/24.6.30/hio | | 1 | /opt/HPCKit/24.6.30/hio | | | | 在回显信息中，查看已加载模块的环境信息变量是否均存在。 - 是，操作结束。 - 否，请先执行 4.1 加载缺失环境变量模块，然后执行 步骤5 。