--- title: 设置环境变量（modules方式） description: "HPCKit支持通过setvars.sh和modules两种方式加载环境变量。modules方式支持选择加载环境变量管理模块，高阶用户可以通过modules方式加载需要的组件。" url: https://www.hikunpeng.com/document/detail/zh/kunpenghpcs/hpckit/instg/KunpengHPCKit_install_014.html sourcePath: /source/zh/kunpenghpcs/hpckit/instg/KunpengHPCKit_install_014.html indexId: 2ca897e028d7c7564e6089ad0745219e7bd04e651837166ffb0b66a678d6bcac66 --- # 设置环境变量（modules方式） HPCKit支持通过setvars.sh和modules两种方式加载环境变量。modules方式支持选择加载环境变量管理模块，高阶用户可以通过modules方式加载需要的组件。 #### 前提条件 - 已配置yum源。执行以下命令检查节点YUM源是否已配置，确保回显中有OS对应的YUM源。 ``` yum list | grep kernel ``` - 已安装tcl工具。 执行以下命令检查是否已安装Tcl工具。 ``` yum list installed | grep tcl.aarch64 ``` 回显有如下信息说明已安装tcl工具。 1 tcl.aarch64 1:8.6.12-4.oe2203sp1 @anaconda 如果未安装tcl工具，执行以下命令安装。 ``` yum install -y tcl* ``` - 已安装module工具。 执行以下命令检查是否已安装module工具。 ``` yum list installed | grep environment-modules.aarch64 ``` 回显有如下信息说明已安装module工具。 1 environment-modules.aarch64 5.0.1-3.oe2203sp1 @OS 如果未安装module工具，执行以下命令安装，并加载环境变量。 ``` yum install -y environment-modules source /etc/profile.d/modules.sh ``` #### 注意事项 建议同一环境中使用一种编译器进行编译，如果同时使用两种编译器进行编译，则需要注意环境变量信息是否正确。具体原因及配置方法如下： 由于环境变量信息中，参数“CC”、“CXX”、“FC”、“F77”、“F90”和“OPAL_PREFIX”的值只针对当前使用的编译器生效，如果要使用另一种编译器，需要先卸载当前已有环境变量模块，然后加载需要另一种编译器进行编译的组件环境变量模块。不同编译器编译对应组件的环境变量管理模块时，其环境变量参数值请参见表1。 示例： 当前使用毕昇编译器，已加载环境变量模块“bisheng/hmpi26.1.RC1/release”，此时，“OPAL_PREFIX”的值为“/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi”，如果需要切换为GCC编译器，则需要先卸载环境变量模块“bisheng/hmpi/hmpi”，然后加载环境变量模块“gcc/hmpi26.1.RC1/release”，加载完成后，“OPAL_PREFIX”的值为“/opt/HPCKit/26.1.RC1/hmpi/gcc/release/hmpi”。 #### 操作步骤 1. 使用PuTTY工具，登录HPCKit的安装节点。 2. 执行以下命令，进入HPCKit安装目录。 ``` cd /opt /HPCKit/latest ``` /opt：HPCKit的默认安装目录，请替换为实际路径。 3. 执行以下命令，添加modulefiles。 ``` module use modulefiles ``` 使用sh modulefiles-setup.sh可以恢复误删的modulefiles文件夹。 4. 执行以下命令，查询可用环境变量模块。 ``` module avail ``` 回显如下类似信息： 1 2 3 4 5 6 7 8 ---------------------------------- /opt/HPCKit/26.1.RC1/modulefiles ------------------------------------------- bisheng/compiler5.2.0/bishengmodule bisheng/kml26.1.RC1/kspblas/omp bisheng/kuqcd26.1.RC1/kuqcd gcc/kml26.1.RC1/kblas/serial-locking gcc/kudnn26.1.RC1/kudnn bisheng/hmpi26.1.RC1/debug bisheng/kml26.1.RC1/kspblas/serial bisheng/kurtm26.1.RC1/kurtm gcc/kml26.1.RC1/kblas/serial-nolocking gcc/kupl26.1.RC1/prof bisheng/hmpi26.1.RC1/release bisheng/kml26.1.RC1/kvml/omp bisheng/kutacc26.1.RC1/kutacc gcc/kml26.1.RC1/kml gcc/kupl26.1.RC1/release bisheng/kml26.1.RC1/kblas/multi bisheng/kml26.1.RC1/kvml/serial gcc/compiler12.3.1/gccmodule gcc/kml26.1.RC1/kspblas/omp gcc/kuqcd26.1.RC1/kuqcd bisheng/kml26.1.RC1/kblas/serial-locking bisheng/kudnn26.1.RC1/kudnn gcc/hmpi26.1.RC1/debug gcc/kml26.1.RC1/kspblas/serial gcc/kurtm26.1.RC1/kurtm bisheng/kml26.1.RC1/kblas/serial-nolocking bisheng/kupl26.1.RC1/prof gcc/hmpi26.1.RC1/release gcc/kml26.1.RC1/kvml/omp hio25.0.0/hio bisheng/kml26.1.RC1/kml bisheng/kupl26.1.RC1/release gcc/kml26.1.RC1/kblas/multi gcc/kml26.1.RC1/kvml/serial 如果回显信息中包含不需要加载的模块信息，您可以执行以下命令删除。 module unuse /opt/HPCKit/26.1.RC1/modulefiles 其中，“/opt/HPCKit/26.1.RC1/modulefiles”为模块名称，请根据实际情况替换。 5. 加载环境变量模块。 a. 执行以下命令，将组件的相关信息添加至环境变量中。 ``` module load modulefile ``` modulefile：组件环境变量管理模块，具体请参见组件环境变量管理模块信息。 示例：将HMPI组件bisheng版本信息添加到环境变量中。 ``` module load bisheng/hmpi26.1.RC1/release ``` b. 执行以下命令，查看已加载环境变量模块。 ``` module list ``` 在回显信息中查看所需环境变量模块是否均存在。 - 是，请执行 6 。 - 否，请先执行 5.a 加载缺失环境变量模块，然后执行 6 。 6. 查询对应组件的环境变量信息。 **表1 组件环境变量信息的查询方法** | 组件名称 | 模块名称 | 操作步骤 | | | | --- | --- | --- | --- | --- | | Compiler | bisheng/compiler5.2.0/bishengmodule | echo $LD\_LIBRARY\_PATH; echo $PATH; echo $CC; echo $CXX; echo $FC; echo $F77; echo $F90; echo $KMP\_DISABLE\_MEMKIND\_INIT 说明： 环境变量参数含义具体如下： LD\_LIBRARY\_PATH：动态链接库的搜索路径，例如“/opt/HPCKit/26.1.RC1/compiler/bisheng/lib”。 PATH：可执行程序的搜索路径，例如“/opt/HPCKit/26.1.RC1/compiler/bisheng/bin”。 CC：编译C语言程序的编译器名称，值为clang。 CXX：编译C++程序的编译器名称，值为clang++。 FC：编译Fortran程序的编译器名称，值为flang。 F77：编译Fortran77程序的编译器名称，值为flang。 F90：编译Fortran90程序的编译器名称，值为flang。 KMP\_DISABLE\_MEMKIND\_INIT: 编译器OMP runtime是否使能MEMKIND组件，值为true。 回显信息示例： 1 2 3 4 5 6 7 8 /opt/HPCKit/26.1.RC1/compiler/bisheng/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/compiler/bisheng/bin:/usr/local/shc/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin clang clang++ flang flang flang true | 1 2 3 4 5 6 7 8 | /opt/HPCKit/26.1.RC1/compiler/bisheng/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/compiler/bisheng/bin:/usr/local/shc/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin clang clang++ flang flang flang true | | Compiler | 1 2 3 4 5 6 7 8 | /opt/HPCKit/26.1.RC1/compiler/bisheng/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/compiler/bisheng/bin:/usr/local/shc/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin clang clang++ flang flang flang true | | | | gcc/compiler12.3.1/gccmodule | echo $LD\_LIBRARY\_PATH; echo $PATH; echo $CC; echo $CXX; echo $FC; echo $F77; echo $F90 说明： 环境变量参数含义具体如下： LD\_LIBRARY\_PATH：动态链接库的搜索路径，例如“/opt/HPCKit/26.1.RC1/compiler/gcc/lib64:/opt/HPCKit/26.1.RC1/compiler/gcc/lib”。 PATH：可执行程序的搜索路径，例如“/opt/HPCKit/26.1.RC1/compiler/gcc/bin”。 CC：编译C语言程序的编译器名称，值为gcc。 CXX：编译C++程序的编译器名称，值为g++。 FC：编译Fortran程序的编译器名称，值为gfortran。 F77：编译Fortran77程序的编译器名称，值为gfortran。 F90：编译Fortran90程序的编译器名称，值为gfortran。 回显信息示例： 1 2 3 4 5 6 7 /opt/HPCKit/26.1.RC1/compiler/gcc/lib64:/usr/local/lib /opt/HPCKit/26.1.RC1/compiler/gcc/bin:/usr/local/shc/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin gcc g++ gfortran gfortran gfortran | 1 2 3 4 5 6 7 | /opt/HPCKit/26.1.RC1/compiler/gcc/lib64:/usr/local/lib /opt/HPCKit/26.1.RC1/compiler/gcc/bin:/usr/local/shc/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin gcc g++ gfortran gfortran gfortran | | | 1 2 3 4 5 6 7 | /opt/HPCKit/26.1.RC1/compiler/gcc/lib64:/usr/local/lib /opt/HPCKit/26.1.RC1/compiler/gcc/bin:/usr/local/shc/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin gcc g++ gfortran gfortran gfortran | | | | | HMPI | bisheng/hmpi26.1.RC1/release | echo $LD\_LIBRARY\_PATH; echo $PATH; echo $INCLUDE; echo $OPAL\_PREFIX 说明： 环境变量参数含义具体如下： LD\_LIBRARY\_PATH：动态链接库的搜索路径，例如“/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hucx/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/xucg/lib”。 PATH：可执行程序的搜索路径，例如“/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hucx/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/xucg/bin”。 INCLUDE：Hyper MPI中hmpi、hucx和xucg组件的头文件目录，例如“/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hucx/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/xucg/include”。 OPAL\_PREFIX：Hyper MPI中hmpi组件的安装目录，例如“/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi”。 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hucx/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/xucg/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hucx/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hucx/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/xucg/include /opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi | 1 2 3 4 | /opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hucx/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/xucg/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hucx/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hucx/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/xucg/include /opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi | | HMPI | 1 2 3 4 | /opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hucx/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/xucg/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hucx/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hucx/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/release/xucg/include /opt/HPCKit/26.1.RC1/hmpi/bisheng/release/hmpi | | | | HMPI | bisheng/hmpi26.1.RC1/debug | echo $LD\_LIBRARY\_PATH; echo $PATH; echo $INCLUDE; echo $OPAL\_PREFIX 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hmpi/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hucx/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/xucg/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hmpi/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hucx/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hmpi/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hucx/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/xucg/include /opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hmpi | 1 2 3 4 | /opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hmpi/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hucx/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/xucg/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hmpi/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hucx/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hmpi/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hucx/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/xucg/include /opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hmpi | | HMPI | 1 2 3 4 | /opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hmpi/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hucx/lib:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/xucg/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hmpi/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hucx/bin:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hmpi/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hucx/include:/opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/xucg/include /opt/HPCKit/26.1.RC1/hmpi/bisheng/debug/hmpi | | | | gcc/hmpi26.1.RC1/release | echo $LD\_LIBRARY\_PATH; echo $PATH; echo $INCLUDE; echo $OPAL\_PREFIX 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/hmpi/gcc/release/hmpi/lib:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/hucx/lib:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/xucg/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/hmpi/gcc/release/hmpi/bin:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/hucx/bin:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/26.1.RC1/hmpi/gcc/release/hmpi/include:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/hucx/include:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/xucg/include /opt/HPCKit/26.1.RC1/hmpi/gcc/release/hmpi | 1 2 3 4 | /opt/HPCKit/26.1.RC1/hmpi/gcc/release/hmpi/lib:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/hucx/lib:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/xucg/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/hmpi/gcc/release/hmpi/bin:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/hucx/bin:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/26.1.RC1/hmpi/gcc/release/hmpi/include:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/hucx/include:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/xucg/include /opt/HPCKit/26.1.RC1/hmpi/gcc/release/hmpi | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/hmpi/gcc/release/hmpi/lib:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/hucx/lib:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/xucg/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/hmpi/gcc/release/hmpi/bin:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/hucx/bin:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/26.1.RC1/hmpi/gcc/release/hmpi/include:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/hucx/include:/opt/HPCKit/26.1.RC1/hmpi/gcc/release/xucg/include /opt/HPCKit/26.1.RC1/hmpi/gcc/release/hmpi | | | | | gcc/hmpi26.1.RC1/debug | echo $LD\_LIBRARY\_PATH; echo $PATH; echo $INCLUDE; echo $OPAL\_PREFIX 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/hmpi/gcc/hmpi/lib:/opt/HPCKit/26.1.RC1/hmpi/gcc/hucx/lib:/opt/HPCKit/26.1.RC1/hmpi/gcc/xucg/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/hmpi/gcc/hmpi/bin:/opt/HPCKit/26.1.RC1/hmpi/gcc/hucx/bin:/opt/HPCKit/26.1.RC1/hmpi/gcc/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/26.1.RC1/hmpi/gcc/hmpi/include:/opt/HPCKit/26.1.RC1/hmpi/gcc/hucx/include:/opt/HPCKit/26.1.RC1/hmpi/gcc/xucg/include /opt/HPCKit/26.1.RC1/hmpi/gcc/hmpi | 1 2 3 4 | /opt/HPCKit/26.1.RC1/hmpi/gcc/hmpi/lib:/opt/HPCKit/26.1.RC1/hmpi/gcc/hucx/lib:/opt/HPCKit/26.1.RC1/hmpi/gcc/xucg/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/hmpi/gcc/hmpi/bin:/opt/HPCKit/26.1.RC1/hmpi/gcc/hucx/bin:/opt/HPCKit/26.1.RC1/hmpi/gcc/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/26.1.RC1/hmpi/gcc/hmpi/include:/opt/HPCKit/26.1.RC1/hmpi/gcc/hucx/include:/opt/HPCKit/26.1.RC1/hmpi/gcc/xucg/include /opt/HPCKit/26.1.RC1/hmpi/gcc/hmpi | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/hmpi/gcc/hmpi/lib:/opt/HPCKit/26.1.RC1/hmpi/gcc/hucx/lib:/opt/HPCKit/26.1.RC1/hmpi/gcc/xucg/lib:/usr/local/lib /opt/HPCKit/26.1.RC1/hmpi/gcc/hmpi/bin:/opt/HPCKit/26.1.RC1/hmpi/gcc/hucx/bin:/opt/HPCKit/26.1.RC1/hmpi/gcc/xucg/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin /opt/HPCKit/26.1.RC1/hmpi/gcc/hmpi/include:/opt/HPCKit/26.1.RC1/hmpi/gcc/hucx/include:/opt/HPCKit/26.1.RC1/hmpi/gcc/xucg/include /opt/HPCKit/26.1.RC1/hmpi/gcc/hmpi | | | | | KML | bisheng/kml26.1.RC1/kml | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 说明： 环境变量参数含义具体如下： LD\_LIBRARY\_PATH：动态链接库的搜索路径，例如“/opt/HPCKit/26.1.RC1/kml/bisheng/lib:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon”。 LIBRARY\_PATH：编译二进制文件时候查找动态库的搜索路径，例如“/opt/HPCKit/26.1.RC1/kml/bisheng/lib:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon”。 PATH：可执行程序的搜索路径，例如“/opt/HPCKit/26.1.RC1/kml/bisheng/include”。 INCLUDE：KML的头文件目录，例如“/opt/HPCKit/26.1.RC1/kml/bisheng/include”。 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/bisheng/lib:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon /opt/HPCKit/26.1.RC1/kml/bisheng/lib:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/lib:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon /opt/HPCKit/26.1.RC1/kml/bisheng/lib:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | KML | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/lib:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon /opt/HPCKit/26.1.RC1/kml/bisheng/lib:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch:/opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | | | KML | bisheng/kml26.1.RC1/kblas/serial\-locking | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kblas/locking /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kblas/locking /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kblas/locking /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kblas/locking /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | KML | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kblas/locking /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kblas/locking /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | | | KML | bisheng/kml26.1.RC1/kblas/serial\-nolocking | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/bisheng/neon/lib/kblas/nolocking /opt/HPCKit/26.1.RC1/kml/bisheng/neon/lib/kblas/nolocking /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/neon/lib/kblas/nolocking /opt/HPCKit/26.1.RC1/kml/bisheng/neon/lib/kblas/nolocking /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | KML | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/neon/lib/kblas/nolocking /opt/HPCKit/26.1.RC1/kml/bisheng/neon/lib/kblas/nolocking /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | | | KML | bisheng/kml26.1.RC1/kblas/multi | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/bisheng/neon/lib/kblas/multi /opt/HPCKit/26.1.RC1/kml/bisheng/neon/lib/kblas/multi /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/neon/lib/kblas/multi /opt/HPCKit/26.1.RC1/kml/bisheng/neon/lib/kblas/multi /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | KML | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/neon/lib/kblas/multi /opt/HPCKit/26.1.RC1/kml/bisheng/neon/lib/kblas/multi /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | | | KML | bisheng/kml26.1.RC1/kspblas/omp | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kspblas/multi /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kspblas/multi /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kspblas/multi /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kspblas/multi /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | KML | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kspblas/multi /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kspblas/multi /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | | | KML | bisheng/kml26.1.RC1/kspblas/serial | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kspblas/single /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kspblas/single /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kspblas/single /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kspblas/single /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | KML | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kspblas/single /opt/HPCKit/26.1.RC1/kml/bisheng/lib/neon/kspblas/single /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | | | KML | bisheng/kml26.1.RC1/kvml/omp | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch/kvml/multi /opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch/kvml/multi /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch/kvml/multi /opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch/kvml/multi /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | KML | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch/kvml/multi /opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch/kvml/multi /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | | | KML | bisheng/kml26.1.RC1/kvml/serial | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch/kvml/single /opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch/kvml/single /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch/kvml/single /opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch/kvml/single /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | KML | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch/kvml/single /opt/HPCKit/26.1.RC1/kml/bisheng/lib/noarch/kvml/single /opt/HPCKit/26.1.RC1/kml/bisheng/include /opt/HPCKit/26.1.RC1/kml/bisheng/include | | | | gcc/kml26.1.RC1/kml | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/gcc/lib:/opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch:/opt/HPCKit/26.1.RC1/kml/gcc/lib/neon /opt/HPCKit/26.1.RC1/kml/gcc/lib:/opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch:/opt/HPCKit/26.1.RC1/kml/gcc/lib/neon /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib:/opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch:/opt/HPCKit/26.1.RC1/kml/gcc/lib/neon /opt/HPCKit/26.1.RC1/kml/gcc/lib:/opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch:/opt/HPCKit/26.1.RC1/kml/gcc/lib/neon /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib:/opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch:/opt/HPCKit/26.1.RC1/kml/gcc/lib/neon /opt/HPCKit/26.1.RC1/kml/gcc/lib:/opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch:/opt/HPCKit/26.1.RC1/kml/gcc/lib/neon /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | | | gcc/kml26.1.RC1/kblas/serial\-locking | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/locking /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/locking /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/locking /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/locking /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/locking /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/locking /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | | | gcc/kml26.1.RC1/kblas/serial\-nolocking | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/nolocking /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/nolocking /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/nolocking /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/nolocking /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/nolocking /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/nolocking /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | | | gcc/kml26.1.RC1/kblas/multi | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/multi /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/multi /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/multi /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/multi /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/multi /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kblas/multi /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | | | gcc/kml26.1.RC1/kspblas/omp | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kspblas/multi /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kspblas/multi /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kspblas/multi /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kspblas/multi /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kspblas/multi /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kspblas/multi /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | | | gcc/kml26.1.RC1/kspblas/serial | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kspblas/single /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kspblas/single /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kspblas/single /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kspblas/single /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kspblas/single /opt/HPCKit/26.1.RC1/kml/gcc/lib/neon/kspblas/single /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | | | gcc/kml26.1.RC1/kvml/omp | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch/kvml/multi /opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch/kvml/multi /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch/kvml/multi /opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch/kvml/multi /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch/kvml/multi /opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch/kvml/multi /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | | | gcc/kml26.1.RC1/kvml/serial | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch/kvml/single /opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch/kvml/single /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch/kvml/single /opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch/kvml/single /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch/kvml/single /opt/HPCKit/26.1.RC1/kml/gcc/lib/noarch/kvml/single /opt/HPCKit/26.1.RC1/kml/gcc/include /opt/HPCKit/26.1.RC1/kml/gcc/include | | | | | KUPL | bisheng/kupl26.1.RC1/release | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kupl/release/bisheng/lib /opt/HPCKit/26.1.RC1/kupl/release/bisheng/lib /opt/HPCKit/26.1.RC1/kupl/release/bisheng/include /opt/HPCKit/26.1.RC1/kupl/release/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kupl/release/bisheng/lib /opt/HPCKit/26.1.RC1/kupl/release/bisheng/lib /opt/HPCKit/26.1.RC1/kupl/release/bisheng/include /opt/HPCKit/26.1.RC1/kupl/release/bisheng/include | | KUPL | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kupl/release/bisheng/lib /opt/HPCKit/26.1.RC1/kupl/release/bisheng/lib /opt/HPCKit/26.1.RC1/kupl/release/bisheng/include /opt/HPCKit/26.1.RC1/kupl/release/bisheng/include | | | | KUPL | bisheng/kupl26.1.RC1/prof | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kupl/prof/bisheng/lib /opt/HPCKit/26.1.RC1/kupl/prof/bisheng/lib /opt/HPCKit/26.1.RC1/kupl/prof/bisheng/include /opt/HPCKit/26.1.RC1/kupl/prof/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kupl/prof/bisheng/lib /opt/HPCKit/26.1.RC1/kupl/prof/bisheng/lib /opt/HPCKit/26.1.RC1/kupl/prof/bisheng/include /opt/HPCKit/26.1.RC1/kupl/prof/bisheng/include | | KUPL | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kupl/prof/bisheng/lib /opt/HPCKit/26.1.RC1/kupl/prof/bisheng/lib /opt/HPCKit/26.1.RC1/kupl/prof/bisheng/include /opt/HPCKit/26.1.RC1/kupl/prof/bisheng/include | | | | gcc/kupl26.1.RC1/release | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kupl/release/gcc/lib /opt/HPCKit/26.1.RC1/kupl/release/gcc/lib /opt/HPCKit/26.1.RC1/kupl/release/gcc/include /opt/HPCKit/26.1.RC1/kupl/release/gcc/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kupl/release/gcc/lib /opt/HPCKit/26.1.RC1/kupl/release/gcc/lib /opt/HPCKit/26.1.RC1/kupl/release/gcc/include /opt/HPCKit/26.1.RC1/kupl/release/gcc/include | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kupl/release/gcc/lib /opt/HPCKit/26.1.RC1/kupl/release/gcc/lib /opt/HPCKit/26.1.RC1/kupl/release/gcc/include /opt/HPCKit/26.1.RC1/kupl/release/gcc/include | | | | | gcc/kupl26.1.RC1/prof | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kupl/prof/gcc/lib /opt/HPCKit/26.1.RC1/kupl/prof/gcc/lib /opt/HPCKit/26.1.RC1/kupl/prof/gcc/include /opt/HPCKit/26.1.RC1/kupl/prof/gcc/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kupl/prof/gcc/lib /opt/HPCKit/26.1.RC1/kupl/prof/gcc/lib /opt/HPCKit/26.1.RC1/kupl/prof/gcc/include /opt/HPCKit/26.1.RC1/kupl/prof/gcc/include | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kupl/prof/gcc/lib /opt/HPCKit/26.1.RC1/kupl/prof/gcc/lib /opt/HPCKit/26.1.RC1/kupl/prof/gcc/include /opt/HPCKit/26.1.RC1/kupl/prof/gcc/include | | | | | KuLitho | bisheng/kulitho26.1.RC1/kulitho | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kulitho/bisheng/lib/sve /opt/HPCKit/26.1.RC1/kulitho/bisheng/lib/sve /opt/HPCKit/26.1.RC1/kulitho/bisheng/include /opt/HPCKit/26.1.RC1/kulitho/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kulitho/bisheng/lib/sve /opt/HPCKit/26.1.RC1/kulitho/bisheng/lib/sve /opt/HPCKit/26.1.RC1/kulitho/bisheng/include /opt/HPCKit/26.1.RC1/kulitho/bisheng/include | | KuLitho | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kulitho/bisheng/lib/sve /opt/HPCKit/26.1.RC1/kulitho/bisheng/lib/sve /opt/HPCKit/26.1.RC1/kulitho/bisheng/include /opt/HPCKit/26.1.RC1/kulitho/bisheng/include | | | | gcc/kulitho26.1.RC1/kulitho | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kulitho/gcc/lib/sve /opt/HPCKit/26.1.RC1/kulitho/gcc/lib/sve /opt/HPCKit/26.1.RC1/kulitho/gcc/include /opt/HPCKit/26.1.RC1/kulitho/gcc/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kulitho/gcc/lib/sve /opt/HPCKit/26.1.RC1/kulitho/gcc/lib/sve /opt/HPCKit/26.1.RC1/kulitho/gcc/include /opt/HPCKit/26.1.RC1/kulitho/gcc/include | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kulitho/gcc/lib/sve /opt/HPCKit/26.1.RC1/kulitho/gcc/lib/sve /opt/HPCKit/26.1.RC1/kulitho/gcc/include /opt/HPCKit/26.1.RC1/kulitho/gcc/include | | | | | KuTACC | bisheng/kutacc26.1.RC1/kutacc | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kutacc/bisheng/lib /opt/HPCKit/26.1.RC1/kutacc/bisheng/lib /opt/HPCKit/26.1.RC1/kutacc/bisheng/include /opt/HPCKit/26.1.RC1/kutacc/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kutacc/bisheng/lib /opt/HPCKit/26.1.RC1/kutacc/bisheng/lib /opt/HPCKit/26.1.RC1/kutacc/bisheng/include /opt/HPCKit/26.1.RC1/kutacc/bisheng/include | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kutacc/bisheng/lib /opt/HPCKit/26.1.RC1/kutacc/bisheng/lib /opt/HPCKit/26.1.RC1/kutacc/bisheng/include /opt/HPCKit/26.1.RC1/kutacc/bisheng/include | | | | | KuRTM | bisheng/kurtm26.1.RC1/kurtm | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kurtm/bisheng/lib /opt/HPCKit/26.1.RC1/kurtm/bisheng/lib /opt/HPCKit/26.1.RC1/kurtm/bisheng/include /opt/HPCKit/26.1.RC1/kurtm/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kurtm/bisheng/lib /opt/HPCKit/26.1.RC1/kurtm/bisheng/lib /opt/HPCKit/26.1.RC1/kurtm/bisheng/include /opt/HPCKit/26.1.RC1/kurtm/bisheng/include | | KuRTM | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kurtm/bisheng/lib /opt/HPCKit/26.1.RC1/kurtm/bisheng/lib /opt/HPCKit/26.1.RC1/kurtm/bisheng/include /opt/HPCKit/26.1.RC1/kurtm/bisheng/include | | | | gcc/kurtm26.1.RC1/kurtm | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kurtm/gcc/lib/ /opt/HPCKit/26.1.RC1/kurtm/gcc/lib/ /opt/HPCKit/26.1.RC1/kurtm/gcc/include /opt/HPCKit/26.1.RC1/kurtm/gcc/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kurtm/gcc/lib/ /opt/HPCKit/26.1.RC1/kurtm/gcc/lib/ /opt/HPCKit/26.1.RC1/kurtm/gcc/include /opt/HPCKit/26.1.RC1/kurtm/gcc/include | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kurtm/gcc/lib/ /opt/HPCKit/26.1.RC1/kurtm/gcc/lib/ /opt/HPCKit/26.1.RC1/kurtm/gcc/include /opt/HPCKit/26.1.RC1/kurtm/gcc/include | | | | | KuDNN | bisheng/kudnn26.1.RC1/kudnn | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kudnn/bisheng/lib/ /opt/HPCKit/26.1.RC1/kudnn/bisheng/lib/ /opt/HPCKit/26.1.RC1/kudnn/bisheng/include /opt/HPCKit/26.1.RC1/kudnn/bisheng/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kudnn/bisheng/lib/ /opt/HPCKit/26.1.RC1/kudnn/bisheng/lib/ /opt/HPCKit/26.1.RC1/kudnn/bisheng/include /opt/HPCKit/26.1.RC1/kudnn/bisheng/include | | KuDNN | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kudnn/bisheng/lib/ /opt/HPCKit/26.1.RC1/kudnn/bisheng/lib/ /opt/HPCKit/26.1.RC1/kudnn/bisheng/include /opt/HPCKit/26.1.RC1/kudnn/bisheng/include | | | | gcc/kudnn26.1.RC1/kudnn | echo $LD\_LIBRARY\_PATH; echo $LIBRARY\_PATH; echo $CPATH; echo $INCLUDE; 回显信息示例： 1 2 3 4 /opt/HPCKit/26.1.RC1/kudnn/gcc/lib/ /opt/HPCKit/26.1.RC1/kudnn/gcc/lib/ /opt/HPCKit/26.1.RC1/kudnn/gcc/include /opt/HPCKit/26.1.RC1/kudnn/gcc/include | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kudnn/gcc/lib/ /opt/HPCKit/26.1.RC1/kudnn/gcc/lib/ /opt/HPCKit/26.1.RC1/kudnn/gcc/include /opt/HPCKit/26.1.RC1/kudnn/gcc/include | | | 1 2 3 4 | /opt/HPCKit/26.1.RC1/kudnn/gcc/lib/ /opt/HPCKit/26.1.RC1/kudnn/gcc/lib/ /opt/HPCKit/26.1.RC1/kudnn/gcc/include /opt/HPCKit/26.1.RC1/kudnn/gcc/include | | | | | HIO | hio25.0.0/hio | echo $HIO\_HOME 回显信息示例： 1 /opt/HPCKit/26.1.RC1/hio | 1 | /opt/HPCKit/26.1.RC1/hio | | 1 | /opt/HPCKit/26.1.RC1/hio | | | | 在回显信息中，查看已加载模块的环境信息变量是否均存在。 - 是，操作结束。 - 否，请先执行 5.a 加载缺失环境变量模块，然后执行 6 。