Documentation
Rate This Document
Findability
Accuracy
Completeness
Readability
SubmitClose

Configuring Device Nodes

  1. Go to the SmartKit home page and select Batch Distribution.

  2. Choose Device Selection.

  3. Add an OS device node that needs to be upgraded.

  4. Enter the device node information, including the start IP address, end IP address, user name, password, and password of root.

    You can add multiple device nodes by configuring the start IP address and end IP address.

  5. Choose Batch Distribution.

  6. Configure a service flow based on the device nodes to be executed.

    Select the custom mode.

    Select a service flow as required. Currently, three default service flows are available: single-node upgrade, batch upgrade, and restoration. Click Import to configure a service flow.

    After the import is successful, you can modify the parameters as required, for example, changing the upgrade tool directory.

    After the configuration is complete, save the configuration and exit. Then, perform the upgrade.