Environment Requirements
Cluster Planning
In this document, a three-node cluster is planned, including three server-side servers and three client-side servers. In addition, during the software compilation process, a server is required for compilation. You can deploy another server outside the cluster or a client-side server in the cluster as the compilation server.
Figure 1 shows the cluster networking.
Table 1 describes the nodes in the cluster.
Hardware Requirements
Table 2 and Table 3 list the server hardware specifications in the cluster.
Item |
Specifications |
|---|---|
Server |
TaiShan 200 server (model 2280) |
Processor |
Kunpeng 920 5220 |
Memory |
256 GB |
Memory frequency |
2933 MHz |
NIC |
2 x 25GE |
System drive |
2 x 480 GB SATA SSD |
Cache drive |
2 x 3.2 TB NVMe SSD |
Data drive |
12 x 8 TB SATA HDD |
Item |
Specifications |
|---|---|
Server |
TaiShan 200 server (model 2280) |
Processor |
Kunpeng 920 5250 |
Memory |
192 GB |
Memory frequency |
2933 MHz |
NIC |
4 x 10GE |
System drive |
2 x 480 GB SATA SSD |
Cache drive |
2 x 3.2 TB NVMe SSD |
Data drive |
12 x 8 TB SATA HDD |
Currently, 7.68 TB NVMe SSDs are supported as cache drives. Two 7.68 TB NVMe SSDs can be used as cache drives in server specifications 1 and 2.
Table 4 and Table 5 list the client hardware requirements and compilation server hardware requirements in the cluster. The packages compiled by the Kunpeng compilation server are to be installed on the Kunpeng servers and clients, and the packages compiled by the x86 compilation server are to be installed on the x86 clients.
OS and Software Requirements
Table 6 lists the OS and software requirements.