Documentation
Rate This Document
Findability
Accuracy
Completeness
Readability
SubmitClose

Environment Requirements

Before installing OmniOperator, prepare the hardware and software environments to facilitate subsequent installation operations.

Hardware Requirements

Table 1 lists the hardware requirements for each node in the cluster.

Table 1 Hardware requirements

Item

Management/Compute/Storage Node

Processor

Kunpeng 920 5250

Memory size

384 GB (12 x 32 GB)

Memory frequency

2666 MHz

NIC
  • Service network: 10GE
  • Management network: GE

Drive
  • System drive: 1 x RAID 0 (1 x 1.2 TB SAS HDD)
  • Data drive: 12 x RAID 0 (12 x 8 TB SATA HDD)

RAID controller card

LSI SAS3508

OS and Software Requirements

Table 2 lists the OS and software requirements for each node in the cluster.

Table 2 OS and software requirements

Item

Version

Description

Management Node (Server)

Compute/Storage Node

OS
  • CentOS 7.9
  • openEuler 20.03 LTS SP1
  • openEuler 22.03 LTS SP1

-

√

√

JDK

BiSheng JDK 1.8 (BiSheng JDK 1.8.0_342 recommended)

openEuler 22.03 LTS SP1 is incompatible with BiSheng JDK 1.8.0_262, which needs to be replaced with BiSheng JDK 1.8.0_342. For details about how to install the BiSheng JDK, see BiSheng JDK 8 Installation Guide.

√

√

Hadoop

3.2.0

See Hadoop Deployment Guide (CentOS 7.6 & openEuler 20.03).

√

√

Spark

3.1.1/3.3.1

See Spark Deployment Guide (CentOS 7.6 & openEuler 20.03).

√

-

Hive

3.1.0

See Hive Deployment Guide (CentOS 7.6 & openEuler 20.03).

√

-

Python

3.10.2 or later

-

√

√
  • √: indicates that the item is required on the node.
  • -: indicates that the item is not required on the node.
  • If the preceding third-party software has vulnerabilities, fix the vulnerabilities based on official instructions.
  • The preceding component versions may be different from those in the Deployment Guide. The Deployment Guide is for reference only.

Obtaining Software Packages

Table 3 describes the OmniOperator software packages and how to obtain them.

Table 3 OmniOperator software packages

Software Name

Package Name

Release Type

Description

Download URL

OmniRuntime package

BoostKit-omniruntime_1.5.0.zip

Closed source

OmniRuntime package. Decompress the package to obtain the OmniOperator software package BoostKit-omniop_1.7.0.zip.

Contact Huawei technical support.

NOTE:

Before using the software package, read and agree to Kunpeng BoostKit User License Agreement 2.0.

SparkExtension

boostkit-omniop-spark-3.1.1-1.7.0-aarch64.zip

Open source

Spark extension package for the OmniOperator computing base.

Link

boostkit-omniop-spark-3.3.1-1.7.0-aarch64.zip

Open source

Spark extension package for the OmniOperator computing base.

Link

HiveExtension

boostkit-omniop-hive-3.1.0-1.7.0-aarch64.zip

Open source

Hive extension package for the OmniOperator computing base.

Link

Dependency_library

Dependency_library.zip

Dependency_library.z01

Dependency_library.z02

Open source

Library file on which OmniOperator depends. The file is compressed into several volumes. Download all the volumes.

Link1

Link2

Link3

Verifying the Software Package Integrity

After downloading a software package from the Kunpeng community, verify the software package to ensure that it is consistent with the original one on the website.

Verify the software packages as follows:

  1. Obtain the digital certificate and software.
  2. Obtain the verification tool and method from the following link:
  3. Verify the package integrity by following the procedure described in the OpenPGP Signature Verification Guide obtained from the URL.
Parent topic: Installation Overview