Documentation
我要评分
获取效率
正确性
完整性
易理解
提交关闭

Configuring Thresholds for Historical Reports

A threshold for historical reports controls the maximum number of reports generated by Kunpeng DevKit tasks. You can customize the thresholds because a large number of historical reports occupy certain drive space.

Prerequisites

You have installed the Kunpeng DevKit.

Only the administrator devadmin can configure thresholds.

Procedure

  1. Click in the upper right corner of the page. Choose Tool Settings > Porting Advisor.
  2. Click Threshold Settings and set Report Warning Threshold and Maximum Report Threshold. See Figure 1.
    Figure 1 Threshold settings
    • The value of Report Warning Threshold ranges from 1 to 49, and the default value is 40. The value of Maximum Report Threshold ranges from 2 to 50, and the default value is 50. The value of Maximum Report Threshold must be greater than that of Report Warning Threshold.
    • When the number of reports reaches the Report Warning Threshold, the system prompts a message, asking you to delete some historical reports to release the storage space. In this case, the use of the tool is not affected.
    • When the number of reports reaches the Maximum Report Threshold, new tasks cannot be added and the system displays a message indicating that the number of reports has reached the maximum. In this case, you need to delete unnecessary historical reports.