Documentation
Rate This Document
Findability
Accuracy
Completeness
Readability
SubmitClose

Adding Node Information for System Migration

Prerequisites

  • You have logged in to the Kunpeng DevKit.
  • You have collected the system component information and ledger information using the System Migration command line tool. For details, see System Migration.

Procedure

  1. In the navigation tree on the left, click next to System Migration. The node management information page is displayed.
    Figure 1 To-Be-Migrated Node Management
  2. In the upper left corner of the page, click Add Node Information for System Migration. You can use either of the following methods to add node information. The system and node names are customizable.
    Figure 2 Add Node Information for System Migration
    • Adding by batch
      1. This is the default option. Click template table to obtain the template and enter the node information.
      2. Click Select to upload the file.
      3. Click OK. On the upper part of the page, the number of pieces of information that are successfully added is displayed.

        For the pieces of information that do not meet the requirements, check the file information and import the file again.

    • Adding by single piece of information
      1. Select Single piece of information, and enter the system name, node name, and IP address.
      2. Click OK. On the upper part of the page, a message is displayed indicating that the node information is successfully added.
  3. After the node information is added, click Import Scan Info in the Operation column. The dialog box shown in Figure 3 is displayed.
    Figure 3 Import Scan Info

    The scan information is presented as the ZIP package that includes the system component and ledger information collected using the System Migration command line tool. To import the scan information of multiple nodes at the same time, you can save the packages to the same directory, compress them into a ZIP package, and import the ZIP package.

  4. Click Select File to upload the compressed package to be scanned, and click OK.
  5. Perform one of the following operations if needed:
    • Delete: You can click Delete next to a system project name to delete all nodes in the system, or click Delete next to a single node name to delete that node.
    • Modify: Only the node name can be changed. After the operation is complete, click OK.
    • Download Ledger: You can download the system ledger or a node ledger.