Viewing Hotspot Function Analysis Results

Prerequisites

A tuning analysis task has been created and completed.

Procedure

1. In the Tuning Assistant area, click on the left of the target analysis task to expand the node list.
2. Click the name of the target node to view the analysis results.
   Figure 1 Analysis result page
   
3. (Optional) Select a service type and suggestion type.
   • Select a service types as required. The options are CPU-intensive, Network I/O-intensive, and Storage I/O-intensive. You can select one or more service types. By default, all the three options are selected.
     Figure 2 Selecting service types
     
   • Select a suggestion type based on the actual situation. You can adjust the topology tree by selecting Tuning path–based suggestions or Threshold-filtered suggestions.
     Figure 3 Selecting a suggestion type
     
4. Click Hotspot Functions to view the analysis result and configure tuning settings.
   Figure 4 Hotspot function analysis result
   

   1. View the tuning suggestion topology tree on the analysis result page. Click and to select the corresponding tuning suggestions based on the configuration conditions.
      Figure 4 Tuning suggestions
      
   2. View the Relevant Configurations, Indicator Description, Optimization Suggestion, and Optimization Guide on the right. Click to adopt the tuning suggestion, or to cancel the adoption of the tuning suggestion.
      Figure 5 Tuning suggestion page
      
   3. The adopted tuning suggestions are saved in the associated report. Click associated report in the lower right corner of the page to access the associated report page.

      All adopted tuning suggestions are displayed on the associated report page. You can click the task name to view the details. Click Valid or Invalid in the lower left corner to report whether the tuning suggestion meets the expectation.

      Figure 6 Associated report
      
5. Click on the right of hotspot function analysis result tab page to view the details.

   The Hotspot Functions Details page includes the Functions and Module parts. You can click a function name to view its detailed information.

   Figure 8 Hotspot function details