Configuring the Thresholds
The System Migration function allows configuring the single-user migration project threshold and file upload threshold. During system running, a large number of projects or files occupy certain drive space. Once a threshold is exceeded, the system displays a message or disables the corresponding function.
Prerequisites
You have installed the Kunpeng DevKit.
Only the administrator devadmin can configure thresholds.
System Migration
- Click
in the upper right corner of the page to go to the configuration page.
- In the full installation package deployment scenario, choose Tool Settings > Porting Advisor.
- In the System Migration tool package deployment scenario, choose Tool Settings > System Migration.
- Click Threshold Settings to set system migration project thresholds. See Figure 1.
Table 1 Parameter description Parameter
Description
Warning Threshold of Migration Projects Per User
When this threshold is reached, the user can still create projects. However, a message is displayed recommending the user to remove a certain number of projects from the system migration task. The value ranges from 1 to 49 and the default value is 40.
Maximum Threshold of Migration Projects Per User
When this threshold is reached, a message is displayed indicating that the user's project space is full and no more projects can be created. The user must remove a certain number of projects from the system migration task. The value ranges from 2 to 50 and the default value is 50.
Maximum File Upload Size (MB)
When the size of a single file exceeds this value, a message is displayed indicating the upper limit. The value ranges from 1 to 2048 and defaults to 2048.
Warning Threshold of Migration Projects Per User must be smaller than Maximum Threshold of Migration Projects Per User.
