register

Command Function

Displays information about one or all register variables and sets register variable values.

Syntax

Displaying a single register variable:

register get [-h | --help] {-n REGISTER_NAME | --name REGISTER_NAME} [-r RANK_ID | --rank RANK_ID]

Displaying all register variables:

register list [-h | --help] [-r RANK_ID | --rank RANK_ID]

Setting the register variable value:

register set [-h | --help] {-n REGISTER_NAME | --name REGISTER_NAME} {-v REGISTER_VALUE | --value REGISTER_VALUE} [-r RANK_ID | --rank RANK_ID]

The register command can be abbreviated as re or reg.

Parameter Description

**Table 1** **get** command parameters
Parameter	Description
-h/--help	Obtains help information. This parameter is optional.
-n/--name	Register variable name. This parameter is mandatory.
-r/--rank	Rank ID. This parameter is optional.

**Table 2** **list** command parameters
Parameter	Description
-h/--help	Obtains help information. This parameter is optional.
-r/--rank	Rank ID. This parameter is optional.

**Table 3** **set** command parameters
Parameter	Description
-h/--help	Obtains help information. This parameter is optional.
-n/--name	Register variable name. This parameter is mandatory.
-v/--value	Register variable value. This parameter is mandatory.
-r/--rank	Rank ID. This parameter is optional.

Example

Display the information about register variable functions:

1	register -h

Command output:

The most commonly used register(reg) sub commands are:
    list        Displays all registers of the specified rank.
    set         Sets a register value of the specified rank.
    get         Obtains the register value of the specified rank.
See 'register(re/reg) COMMAND -h/--help' for more information on a specific command.

Parent topic: Debugging Status Commands