Configuring the Threshold
You can configure the historical report threshold and the file upload threshold. During system running, a large number of reports or files occupy certain drive space. Once a threshold is exceeded, the system displays a message or disables the corresponding function.
Prerequisites
You have installed the Kunpeng DevKit.
Only the administrator devadmin can configure thresholds.
Procedure
- Click
in the upper right corner of the page. Choose Tool Settings > Porting Advisor. - Click Set Threshold and set related thresholds. See Figure 1.
Table 1 Threshold parameters Parameter
Description
Report Warning Threshold
When this threshold is reached, a message is displayed asking the user to delete some historical reports to release drive space. In this case, the tool use is not affected. The value ranges from 1 to 2,999 and defaults to 40.
Maximum Report Threshold
When this threshold is reached, a message is displayed indicating that the number of reports has reached the maximum value and no more tasks can be created. The user must delete unnecessary historical reports. The value ranges from 2 to 3,000 and defaults to 50.
Maximum File Upload Size (MB)
When the size of a single file exceeds this value, a message is displayed indicating the upper limit. The value ranges from 1 to 2,048 and defaults to 2048.
Report Warning Threshold must be smaller than Maximum Report Threshold.
