Logging In to the Kunpeng DevKit

Browser Requirements

Procedure

• By default, the system locks a user account upon five consecutive login failures. The user account will be automatically unlocked three minutes later.
• The default timeout interval of the system is 30 minutes. If you do not perform any operation on the user interface within 30 minutes, the account is automatically logged out. You need to enter the username and password to log in the Kunpeng DevKit again. On the Kunpeng DevKit home page, the administrator can click and choose System Settings to set the session timeout period. The value ranges from 10 to 10,080 minutes.
• For security purposes, a common user needs to change the initial password after the first login and update the password periodically.
• By default, the tool supports concurrent access from a maximum of 10 common users. The administrator is not restricted and can access the tool even when there are 10 users online. The administrator can click and choose System Settings on the Kunpeng DevKit home page and set Max. Online Common Users. The value ranges from 1 to 20.
• Each user is allowed to set up only one active session with the tool. If an online user tries to log in again, the previous login will be terminated.
• When you log in for the first time, the usage statement is displayed. Read the statement carefully, select I have read and agree to, and click OK to use this tool. If you click Cancel, and then click Cancel again in the displayed dialog box, the DevKit will exit.
• Some tools involve third-party open source libraries whose compilation options are guaranteed by third parties and do not contain security compilation options (BIND_NOW, SP, Strip, and Rpath). The DevKit is not liable for any security issue introduced by third-party open source libraries.
• If you use single sign-on (SSO), you can log in to the tool after being authorized by a third-party authentication system, and multiple administrators are allowed for login using SSO.

1. Open a browser on the local PC, enter https://server_IP_address:port_number (for example, https://xx.xx.xx.xx:8086) in the address box, and press Enter.
   

   The default HTTPS port number is 8086. Before using this tool, ensure that port 8086 have been enabled on the operating system (OS) firewall.

2. In the security alert window shown in Figure 1, click Advanced and select Proceed to....
   

   If a website security alert is displayed, you can ignore this message or download the Huawei root certificate to mask this alert. For details, see Importing a Root Certificate for the Kunpeng DevKit.

   Figure 1 Security alert
   

   The first login page is displayed, as shown in Figure 2. Table 2 describes the parameters on the page. Select I have read and agree to the content above in the Usage Statement window that is displayed upon your first login.

   Figure 2 First login to the Kunpeng DevKit
   

   Table 2 Parameters on the first login page

   Parameter	Description
   User Name	User for logging in to the Kunpeng DevKit. NOTE: The default administrator is devadmin. Upon the first login, you need to set the administrator password.
   Password	Password for login. The password must meet the following complexity requirements: Contain 8 to 32 characters. Contain at least two types of the following characters: uppercase letters, lowercase letters, digits, and special characters `~!@#$%^&*()-_=+\|[{}];:'",<.>/? Cannot contain any space. Cannot be the same as the user name or the user name in reverse order. Cannot contain more than two consecutive characters of the user name. Cannot be a password in the weak password dictionary.
   Confirm Password	Password re-entered for confirmation.

3. Enter the password of the administrator and click OK.

   The page shown in Figure 3 is displayed. Table 3 describes the parameters.

   Figure 3 Non-first login to the Kunpeng DevKit
   

   Table 3 Parameters on the non-first login page

   Parameter	Description
   User Name	User for logging in to the Kunpeng DevKit. NOTE: The default administrator is devadmin.
   Password	Password for login. Change this password periodically for security purposes.

4. Enter the user name and password, and click Log In.

   Common users are prompted to change their passwords upon the first login. The password must meet the following complexity requirements:

   • Contain 8 to 32 characters.
   • Contain at least two types of the following characters:
     • Uppercase letters A to Z
     • Lowercase letters a to z
     • Digits 0 to 9
     • Special characters (`~!@#$%^&*()-_=+\|[{}];:'",<.>/?)
   • Cannot be the same as the user name or the user name in reverse order.
   • Cannot contain more than two consecutive characters of the user name.
   • Cannot be the same as the old password.
   • Cannot be the old password in reverse order.
   • Cannot be a password in the weak password dictionary.
   

   The password of the Kunpeng DevKit user is valid for 90 days. Change the password before the password expires. If the password has expired, change the password immediately after login.

   If the login is successful, the home page is displayed and the user name is displayed in the upper right corner of the page.