Run Log Management

Prerequisites

You have logged in to the Kunpeng DevKit.

• Only the administrator devadmin can view and download run logs and change the run log level.
• The administrator can click and choose System Settings from the General Settings drop-down list to set the Run Log Level. The logs of the specified level and higher levels will be recorded.

Procedure

1. Click in the upper right corner. Choose General Settings > Log Management.

   On the Log Management page displayed, choose Run Logs. See Figure 1.

   Figure 1 Run log
   
2. Select the required log module and click Download to obtain the corresponding run logs.

   The run log downloaded is in the following format:

   [Time] [Log level] [Process ID] [Thread name] [Module name: Function name: Line number] Log details

   Example:

   1	[2023-06-30 09:50:21] [INFO] [processID:18508] [MainThread][solution_api:get_solution_category:143] get_solution_category

   The log level indicates the importance of the log information. The default log level is INFO. The run logs of the tool are classified into the five levels: DEBUG, INFO, WARNING, ERROR and CRITICAL.

   • DEBUG: debugging information for fault locating.
   • INFO: key information about the normal running of the service.
   • WARNING: events about the system in unexpected status that does not affect the running of the system.
   • ERROR: errors that may not affect the application running.
   • CRITICAL: critical errors that cause the application improper running.