Logging In to the Kunpeng DevKit

Browser Requirements

Precautions

• By default, the system locks a user account upon five consecutive login failures. The user account will be automatically unlocked three minutes later.
• The default timeout interval of the system is 30 minutes. If you do not perform any operation on the user interface within 30 minutes, the account is automatically logged out. You need to enter the user name and password again to log in the Kunpeng DevKit. On the Kunpeng DevKit home page, the administrator can click and choose General Settings > System Settings to set the session timeout period. The value ranges from 10 to 10,080 minutes.
• By default, a maximum of 10 common users can log in at the same time. The administrator can click and choose General Settings > System Settings on the Kunpeng DevKit home page and manually configure the maximum allowed number of online common users. The value ranges from 1 to 20.
• Each user is allowed to set up only one active session with the tool. If an online user tries to log in again, the previous login will be terminated.
• Some tools involve third-party open source libraries whose compilation options are guaranteed by third parties and do not contain security compilation options (BIND_NOW, SP, Strip, and Rpath). The DevKit is not liable for any security issue introduced by third-party open source libraries.
• If you use single sign-on (SSO), you can log in to the tool after being authorized by a third-party authentication system, and multiple administrators are allowed for login using SSO.

Procedure

1. Open a browser on the local PC, enter https://server_IP_address:port_number (for example, https://xx.xx.xx.xx:8086) in the address box, and press Enter.
   

   The default HTTPS port number is 8086. Before using this tool, ensure that port 8086 have been enabled on the operating system (OS) firewall.

2. In the security alert window shown in Figure 1, click Advanced and select Proceed to....
   

   If a website security alert is displayed, you can ignore this message or download the Huawei root certificate to mask this alert. For details, see Importing a Root Certificate for the Kunpeng DevKit.

   Figure 1 Security alert
   
3. Log in to the Kunpeng DevKit. When the login is successful, the home page is displayed. Your user name is displayed in the upper right corner of the page.
   

   • Change your password periodically. The password of the Kunpeng DevKit user is valid for 90 days. Change the password before the password expires. If the password has expired, change it immediately after login.
   • After the administrator creates a user or resets the password of a user, you are advised to change the password upon the first login based on the password rules.
   • When you log in for the first time, the usage statement is displayed. Read the statement carefully, select I have read and agree to, and click OK to use this tool. If you click Cancel, and then click Cancel again in the displayed dialog box, the DevKit will exit.
   • #EN-US_TOPIC_0000001586803417/en-us_topic_0000001278742309_en-us_topic_0000001085632596_en-us_topic_0188408926_fig127661116445 shows the first login to the Kunpeng DevKit. #EN-US_TOPIC_0000001586803417/en-us_topic_0000001278742309_en-us_topic_0000001085632596_en-us_topic_0188408926_table22002056103214 describes the parameters. Set the administrator password and click Log In.
     Figure 2 First login to the Kunpeng DevKit
     

     Table 2 Parameters on the first login page

     Parameter	Description
     User Name	User for logging in to the Kunpeng DevKit. NOTE: The default administrator is devadmin. Upon the first login, you need to set the administrator password.
     Password	Password for login. The password must meet the following complexity requirements: Contain 8 to 32 characters. Contain at least two types of the following characters: uppercase letters, lowercase letters, digits, and special characters `~!@#$%^&*()-_=+\|[{}];:'",<.>/? Cannot contain any space. Cannot be the same as the user name or the user name in reverse order. Cannot contain more than two consecutive characters of the user name. Cannot be a password in the weak password dictionary.
     Confirm Password	Password re-entered for confirmation.

   • Figure 3 shows the non-first log in to the Kunpeng DevKit. Table 3 describes the parameters. Enter your user name and password, and click Log In.
     Figure 3 Non-first login to the Kunpeng DevKit
     

     Table 3 Parameters on the non-first login page

     Parameter	Description
     User Name	User for logging in to the Kunpeng DevKit. NOTE: The default administrator is devadmin.
     Password	Password for login.

   • If you are a common user and log in to the Kunpeng DevKit for the first time, enter your user name and password and click Log In.

     The password must meet the following complexity requirements:

     • Contain 8 to 32 characters.
     • Contain at least two types of the following characters: uppercase letters, lowercase letters, digits, and special characters `~!@#$%^&*()-_=+\|[{}];:'",<.>/?
     • Cannot contain any space.
     • Cannot be the same as the user name or the user name in reverse order.
     • Cannot contain more than two consecutive characters of the user name.
     • Cannot be the same as the old password.
     • Cannot be the old password in reverse order.
     • Cannot be a password in the weak password dictionary.