System Settings

Prerequisites

You have installed the Kunpeng DevKit.

Only the administrator devadmin can perform system settings. Common users have only the view permission.

Procedure

1. Click in the upper right corner of the page. Choose General Settings > System Settings. The System Settings page is displayed.
2. Set the parameters as required. See Figure 1. Table 1 describes the parameters.
   Figure 1 System Settings
   

   Table 1 Parameter description

   Parameter	Description
   Max. Online Common Users	Maximum number of concurrent online common users. The value ranges from 1 to 20. The default value is 10.
   Session Timeout Period (min)	Session timeout period. The default value is 30. The value ranges from 10 to 10080.
   Server Certificate Expiration Alarm Threshold (days)	Alarm threshold for server certificate expiration. The default value is 90. The value ranges from 7 to 180.
   Agent Certificate Expiration Alarm Threshold (days)	Alarm threshold for certificate expiration on an agent node. The default value is 90. The value ranges from 7 to 180.
   Run Log Level	DEBUG: debugging information for fault locating. INFO: key information about the normal running of the service. WARNING: events about the system in unexpected status that does not affect the running of the system. ERROR: errors that may not affect the application running. CRITICAL: critical errors that cause improper application running.
   Certificate Validity Check	Indicates whether to check the certificate validity.
   Password Validity Period (days)	The options are as follows: Permanently valid Custom: The default value is 90 days. The value range is 7 to 180 days.

3. The system automatically saves the configuration data on this page.