Documentation
Rate This Document
Findability
Accuracy
Completeness
Readability
SubmitClose

Error Reported During SPDK OSD Deployment

Symptom

When a service operation is performed, an error message is displayed, as shown in Figure 1.

Figure 1 Error message

Possible Cause

"Current mode is 'VA'" is recorded in logs. There is a high probability that the SMMU (IOMMU) is not disabled.

Solution

  1. Log in to the BIOS. For details, see "Accessing the BIOS" in TaiShan Server BIOS Parameter Reference (Kunpeng 920 Processor).
  2. Choose Advanced > MISC Config > Support Smmu.

  3. Set Support Smmu to Disabled and press F10 to save the settings and exit.

Parent topic: FAQs